Technical Reference; About This Section - ABB SPA-ZC 402 Installation And Commissioning Manual

1MRS755380
7.
7.1.
SPA/ Ethernet Adapter
Installation and Commissioning Manual

Technical reference

About this section

This chapter defines the compliance to IEC 61850 in terms of service, modeling,
engineering interfaces and also exceptions and local adaptations. The information
gives you a detailed explanation of the IEC 61850 capabilities of a product.
This chapter provides information about the following issues:
• ACSI conformance statement
• Model conformance statement
• SCL conformance statement
• SCL control block
• Protocol implementation conformance statement
The ACSI conformance statement describes the abstract service interfaces, which
are normally mapped to specific communication service (SCSM) and therefore
indirectly stated in the protocol implementation conformance statement. The
conformance statements and documents are referred to as Protocol Implementation
Conformance Statement (PICS) and Model Implementation Conformance
Statement (MICS).
Notations
For the following clauses, the following definitions apply:
M/m Mandatory support.
The item must be implemented.
C/c Conditional support.
The item must be implemented if the stated condition exists.
O/o Optional support.
The implementation may decide to implement the item.
x The implementation must not implement this item (excluded).
i The implementation of the item is not within the scope of this product
(out-of-scope).
F/S Functional Standard. Should be applied.
Base Must be applied in any application claiming conformance to this
standard.
SPA-ZC 402
59