Install The Access Point Using Kt-150173-01 Extension Arm; Install The Access Point On A Wall Using Mbo-Art02 Articulating Mounting Bracket - Extreme Networks AP560i Installation Manual

Hide thumbs Also See for AP560i:
Table of Contents

Advertisement

Install the Access Point Using KT-150173-01 Extension
Arm
4. Attach one end of the KT-150173-01 extension arm to the 1-axis tilt bracket using two hex-head M12
stainless-steel screws and two hex-head M12 stainless-steel nuts through the two large circular holes
on the KT-150173- 01 extension arm.
5. Attach the KT-150173-01 extension arm, that now has the access point mounted on the other end, to
a flat surface using four M6 size hex-head screws.
Use screw-in anchors with the four M6 hex-head screws when you mount the bracket on a wood
surface and use concrete anchors for concrete surface.

Install the Access Point Using KT-150173-01 Extension Arm

Before You Begin
Hardware required to install the access point on a wall using the KT-150173-01 extension arm:
KT-150173-01 extension arm
Four M6 screws
Four M6 hex-head screws
One access point
Procedure
1. Using the KT-150173-01 extension arm as a template, mark and drill four hole centers on a flat
surface.
The holes must be within the circular cuts in the end of the flange.
2. Attach one end of the KT-150173-01 extension arm to the access point using four M6 screws.
3. Attach the other end of the KT-150173-01 extension arm to the wall using four M6 hex-head screws.
Use screw-in anchors with the four M6 hex-head screws when you mount the bracket on a wood
surface and use concrete anchors for concrete surface.

Install the Access Point on a Wall Using MBO-ART02 Articulating Mounting Bracket

About This Task
Table 10: Hardware requirements for MBO-ART02 articulating mounting bracket wall installation
Quantity
1
1
6
Note
When using the MBO-ART02 articulating mounting bracket, set the minimum downward tilt
to less than 20 degrees to prevent water ingress.
To install the access point on a wall:
34
ExtremeWireless™ AP560i Access Point
Item
Access point
MBO-ART02 articulating mounting bracket
M6 hex-head screws
Two M6 hex-head screws to attach the MBO-ART02 to the access
point.
Four M6 hex-head screws to attach the MBO-ART02 bracket to the
wall.
Install the Access Point

Advertisement

Table of Contents
loading

Table of Contents