Install The Access Point; Box Contents; Position The Access Point Before Installation - Extreme Networks ExtremeWireless AP410C-1-WR Installation Manual

Install the Access Point

Box Contents

Position the Access Point before Installation

Install the Access Point on a Standard Ceiling Rail
Non-Standard Ceiling Grid or Wall Installation
Lock the Access Point after Installation
AP410C access point pre-installation checklist.
About This Task
Install the access point on a flat surface such as a wall or to a standard dropped ceiling grid rail. For
bracket and accessories information, see
Procedure
1. Verify the
2. Visually inspect the access point, the bracket, and any other optional accessories you have ordered
for physical damage.
If there is any damage, contact
3. Read and review the
Box Contents
Details about AP410C access point box contents.
When you purchase the access point, ensure that the following items are available in the box:
•
An AP410C access point
•
Mounting bracket for Prelude (15/16 in. ceiling grid) T-bar ceiling installation (part number AH-ACC-
BKT-AX-TB)
•
Read Me card
Position the Access Point before Installation
Details about access point pre-installation position.
There is a red dot on the back of the access point and the bracket that will work as a guide to position
the access point for installation. Line up the red dot on the access point and the bracket for ease of
installation.
on page 13
Extreme Networks 11.ax Access Points Accessories
box contents.
Extreme Networks
safety guidelines.
on page 13
on page 14
on page 18
on page 22
Support.
ExtremeWireless™ AP410C Access Point
Guide.
13