Extreme Networks AP560i Installation Manual page 26

Install the EIO-04 Under-Seat Slope Bracket with the
Access Point Against a Stadium Riser Slope Using EIO-
GASKET
Figure 4: EIO-GASKET
Procedure
1. Attach a metal "L" bracket on each side of the AP560i access point using two M6 screws for each
bracket.
2. Torque the M6 screws to 35 in-lbs.
3. Use the metal "L" brackets as a template, mark four hole centers, and drill in the concrete.
4. Insert four concrete anchors into the holes without the washers and nuts.
5. Insert the 2 concrete anchors without the washers or nuts.
26 ExtremeWireless™ AP560i Access Point
Install the Access Point