Access Point Bracket Usage And Mounting Options - Extreme Networks AP560i Installation Manual

Install the Access Point

Access Point Bracket Usage and Mounting Options

The AP560i access point can be mounted under a seat, on a wall, or to a pole, which are described in
the following table.
Table 5: AP560i mounting bracket usage
Mounting bracket
and part number
EIO-04 under-seat
housing; also used
with EIO-GASKET
silicone rubber kit
KT-147407-02
bracket; comes
with three bracket
parts
KT-150173-01;
extension arm;
used with
KT-147407-02
bracket parts
Wall install Pole install
No No
Yes Yes
Yes; place Yes; attach the
the KT-150173-01 KT-147407-02 pole
extension arm on part to the
top of the 1-axis extension arm
KT-147407-02 tilt
part
Access Point Bracket Usage and Mounting Options
Under-seat install
Yes
No
No
ExtremeWireless™ AP560i Access Point
Notes
The access point
can be installed
under a seat on
a slope or a flat
surface such as
stadium floor
The EIO-GASKET
silicone rubber kit
is used when the
access point is
installed with a
small chamfer or
no chamfer (90°
corner)
For attaching to
a wall or a flat
surface, use the
bracket part that
has two holes.
For attaching to
a pole, attach the
KT-147407-02 pole
part on top of the
1-axis tilt part
None
17