Extreme Networks AP560i Installation Manual
  1. Manuals
  2. Brands
  3. Extreme Networks Manuals
  4. Wireless Access Point
  5. ExtremeWireless AP560i
  6. Installation manual
Extreme Networks AP560i Installation Manual

Extreme Networks AP560i Installation Manual

Hide thumbs Also See for AP560i:
Table of Contents

Advertisement

Quick Links

Download this manual
ExtremeWireless™ AP560i Access Point
Installation Guide
9036165-04 Rev AA
November 2022

Advertisement

Table of Contents
loading

Related Manuals for Extreme Networks AP560i

Summary of Contents for Extreme Networks AP560i

  • Page 1 ExtremeWireless™ AP560i Access Point Installation Guide 9036165-04 Rev AA November 2022...
  • Page 2 Copyright © 2022 Extreme Networks, Inc. All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made.

  • Page 3: Table Of Contents

    When to use the EIO-GASKET in a stadium environment?..............9 Installation Do's and Don'ts.............................9 AP560i Overview............................10 AP560i Features................................. 10 AP560i Purchase Order Information......................... 12 AP560i order information..........................12 EIO-04 under-seat enclosure order information................12 KT-147407-02 bracket order information....................13 KT-150173-01 extension arm order information................... 14 MBO-ART02 bracket order information....................
  • Page 4 NCC Statement................................58 CE Information................................58 CE Information..............................58 All Operational Modes............................ 59 BSMI RoHS Table................................59 European Waste Electrical and Electronic Equipment (WEEE) Notice......... 60 Declaration of Conformity in Languages of the European Community........60 Index................................63 ExtremeWireless™ AP560i Access Point...

  • Page 5: Preface

    ExtremeSwitching switches or SLX routers, the product is referred to as the switch or the router. Table 1: Notes and warnings Icon Notice type Alerts you to... Helpful tips and notices for using the product Note Useful information or instructions Important Important features or instructions ExtremeWireless™ AP560i Access Point...
  • Page 6 Repeat the previous element, for example, member[member...]. In command examples, the backslash indicates a “soft” line break. When a backslash separates two lines of a command input, enter the entire command at the prompt without the backslash. ExtremeWireless™ AP560i Access Point...

  • Page 7: Send Feedback

    Send Feedback Send Feedback The Information Development team at Extreme Networks has made every effort to ensure that this document is accurate, complete, and easy to use. We strive to improve our documentation to help you in your work, so we want to hear from you. We welcome all feedback, but we especially want to know about: •...

  • Page 8: Subscribe To Product Announcements

    Extreme Networks products Extreme Optics Compatibility Other resources such as white papers, data sheets, and case studies Extreme Networks offers product training courses, both online and in person, as well as specialized certifications. For details, visit www.extremenetworks.com/education/. viii ExtremeWireless™ AP560i Access Point...

  • Page 9: New In This Document

    When to use the EIO-GASKET in a stadium environment? • When pressure washer pushes debris behind the ramp base For EIO-GASKET purchase information, see AP560i Purchase Order Information on page 12. For EIO-GASKET installation information, see Install the EIO-04 Under-Seat Slope Bracket with the Access Point Against a Stadium Riser Slope Using EIO-GASKET on page 25.

  • Page 10: Ap560I Overview

    The AP560i access point caters to the stadium and outdoor environment by supporting high density of users and devices. The AP560i access point offers flexible deployment options, and can be mounted under a seat, to a pole, or to a wall.
  • Page 11 AP560i Overview AP560i Features Figure 1: AP560i side ports Callout Description GE1 port GE2 port Console port Note The console port cap must be tightened to a torque of 12 in-lbs. If a torque wrench is not available, a flat-bladed screwdriver can be used. The flat blade must be 7/16 in.

  • Page 12: Ap560I Purchase Order Information

    11ax access point. Internal Antenna. Domain: US and Columbia EIO-04 under-seat enclosure order information If you need to install the AP560i access point under a seat, you need to purchase the EIO-04 under-seat enclosure. Note Use the EIO-GASKET kit when you have concerns about dirt getting between the AP560i access point rear and the stadium riser.

  • Page 13: Kt-147407-02 Bracket Order Information

    You can attach the access point to a wall using the MBO-ART02 bracket. However, if you are using the MBO-ART02 bracket to attach the access point to a pole, you must use the WS-MBO-POLE01 bracket along with the MBO-ART02 bracket. ExtremeWireless™ AP560i Access Point...

  • Page 14: Kt-150173-01 Extension Arm Order Information

    Box contents KT-150173-01 One KT-150173-01 12 in. extension arm Two hex-head M12 stainless-steel screws Two hex-head M12 stainless-steel nuts One URL card Note You must provide the required M6 hex-head screws and nuts for flat surface installation. ExtremeWireless™ AP560i Access Point...

  • Page 15: Mbo-Art02 Bracket Order Information

    Four concrete anchors with washers and nuts Two stainless-steel M6 screws One hex-head screw One URL card WS-MBO-POLE01 bracket order information Part number Box contents WS-MBO-POLE01 One WS-MBO-POLE01 bracket Four M3 screws with nuts and washers One URL card ExtremeWireless™ AP560i Access Point...

  • Page 16: Install The Access Point

    Power or Pressure Washing Guidelines on page 47 About This Task The AP560i access point can be installed under a seat, to a wall, or to a pole. The purchase order information gives you more details about choosing the right access point bracket for your installation needs.

  • Page 17: Access Point Bracket Usage And Mounting Options

    Access Point Bracket Usage and Mounting Options Access Point Bracket Usage and Mounting Options The AP560i access point can be mounted under a seat, on a wall, or to a pole, which are described in the following table. Table 5: AP560i mounting bracket usage...
  • Page 18 Access Point Bracket Usage and Mounting Options Install the Access Point Table 5: AP560i mounting bracket usage (continued) Mounting bracket Wall install Pole install Under-seat install Notes and part number MBO-ART02 The articulating mounting bracket is paired with the POLE01 bracket for pole installations.

  • Page 19: Installation Do's And Don'ts

    Torque the ground screw to a minimum of 7 in-lbs. and a maximum of 12 in-lbs. Power or pressure washer scenario: • Maintain a minimum distance of 24 inches between the pressure washer nozzle and the access point. ExtremeWireless™ AP560i Access Point...

  • Page 20: Install The Access Point Under-Seat

    Under bench, stadium riser mounted applications only • If the AP560i access point is mounted with a portion above the riser, ensure that there is a solid backing plate covering the entire access point and service panel (EIO-03-SP) bottoms. •...

  • Page 21: Install The Eio-04 Under-Seat Slope Bracket And The Access Point

    Install the Access Point Access Point Install the EIO-04 Under-Seat Slope Bracket and the Access Point Install the EIO-04 under seat enclosure with the AP560i access point on a stadium slope. Before You Begin Table 6: Hardware requirements for slope installation...
  • Page 22 7. Run the cable through the conduit and add the RJ45 connectors to the wires. Note The cable should have 1 in. bend radius and be accessible to the glands on AP560i access point. For more information about GE1 or GE2 cable, refer to Connect the GE1 or GE2 cable topic.

  • Page 23: Install The Access Point On A Flat Surface Using Eio-04 Brackets

    Install the Access Point Brackets 8. Attach the metal L bracket to the access point: a. Attach the metal “L” bracket to the gland side of the AP560i access point using two M6 screws. b. Torque the screws to 35 in-lbs. Note...
  • Page 24 Brackets Install the Access Point Procedure 1. Attach an EIO-04 metal “L” bracket on each side of the AP560i access point using two M6 screws for each bracket. Note When installing the access point flat against a surface in a location that uses ice melt, the best practice is to apply an anti-seize material to the screws before attaching them to the access point metal base.

  • Page 25: Install The Eio-04 Under-Seat Slope Bracket With The Access Point Against A Stadium Riser Slope Using Eio-Gasket

    Install the EIO-04 Under-Seat Slope Bracket with the Access Point Against a Stadium Riser Slope Using EIO-GASKET Learn how to install the EIO-04 under-seat enclosure with the AP560i access point on a flat surface, with EIO-GASKET sealing the space between the slope bracket and the stadium riser.
  • Page 26 Install the Access Point Figure 4: EIO-GASKET Procedure 1. Attach a metal “L” bracket on each side of the AP560i access point using two M6 screws for each bracket. 2. Torque the M6 screws to 35 in-lbs. 3. Use the metal “L” brackets as a template, mark four hole centers, and drill in the concrete.
  • Page 27 6. Using a single security torx screw for each gasket attach a gasket to each side of the metal slope. Figure 5: EIO-GASKET screw Callout Description EIO-GASKET made of compressible silicone rubber EIO-GASKET screw hole location for attaching the provided screw ExtremeWireless™ AP560i Access Point...
  • Page 28 Figure 6: EIO-GASKET on a stadium riser Callout Description EIO-GASKET on a 90° stadium riser 7. Place the metal slope over the threaded anchor posts and put on the flat-washer, the spring washer, and the nut on each side. ExtremeWireless™ AP560i Access Point...

  • Page 29: Install The Access Point On A Wall

    Install the Access Point Install the Access Point on a Wall 8. Torque the nuts to 60 in-lbs. Figure 7: AP560i flat surface installation with metal “L” brackets Install the Plastic Service Panel on the Access Point on page 44.

  • Page 30: Install The Access Point On A Wall Or Flat Surface Using The Kt-147407-02 Bracket Parts

    Hardware requirements for a wall or flat surface installation: • Flat part of the KT-147407-02 bracket • 1-axis tilt part of the KT-147407-02 bracket • One access point • Six M6 screws • Four M6 headsize screws ExtremeWireless™ AP560i Access Point...
  • Page 31 Install the Access Point on a Wall or Flat Surface Using Install the Access Point the KT-147407-02 Bracket Parts Figure 8: Flat part of the KT-147407-02 bracket ExtremeWireless™ AP560i Access Point...
  • Page 32 1-axis tilt bracket using four M6 screws. 5. Tilt the access point to a desired angle and tighten the four M6 screws to a torque of 45 in-lbs. The tilt bracket has +15 degrees to -15 degrees of tilt. ExtremeWireless™ AP560i Access Point...

  • Page 33: Install The Access Point Using Kt-147407-02 Bracket Parts And Kt-150173-01 Extension Arm

    M6 screws. 3. Using the KT-150173-01 extension arm as a template, mark and drill four hole centers on a flat surface. The holes must be within the circular cuts in the end of the flange. ExtremeWireless™ AP560i Access Point...

  • Page 34: Install The Access Point Using Kt-150173-01 Extension Arm

    Four M6 hex-head screws to attach the MBO-ART02 bracket to the wall. Note When using the MBO-ART02 articulating mounting bracket, set the minimum downward tilt to less than 20 degrees to prevent water ingress. To install the access point on a wall: ExtremeWireless™ AP560i Access Point...
  • Page 35 2. Attach the MBO-ART02 to the access point using two M6 hex-head screws. 3. Align the mounting holes on the MBO-ART02 articulating mounting bracket against the holes on the wall and attach the bracket using four M6 hex-head screws. ExtremeWireless™ AP560i Access Point...

  • Page 36: Install The Access Point On A Pole

    The pole bracket part of the KT-147407-02 bracket. The KT-150173-01 extension arm with the pole part of the KT-147407-02 bracket. The following hardware is required to install the AP560i access point on a pole: • Flat part of the KT-147407-02 bracket •...
  • Page 37 1. Attach the KT-147407-02 flat part and 1-axis tilt part to the access point. For instructions on how to attach the bracket parts, see Install the flat part and the 1-axis tilt part of the KT-147407-02 bracket to the access point. ExtremeWireless™ AP560i Access Point...
  • Page 38 2. Attach the KT-147407-02 pole part to the 1-axis tilt bracket using two M12 bolts through the large bracket holes on the 1-axis tilt bracket and the pole bracket. 3. Fasten the bolts using two M12 hex nuts. Figure 13: AP560i access point with KT-147407-02 bracket parts Callout Description...

  • Page 39: Install The Access Point On A Pole Using Kt-147407-02 Bracket Parts And Kt-150173-01 Extension Arm

    2. Align the circular holes on one end of the KT-150173-01 extension arm against the large holes on the 1-axis tilt bracket. 3. Attach the KT-150173-01 extension arm to the 1-axis tilt bracket by using two hex-head M12 stainless- steel screws and two hex-head M12 stainless-steel nuts. ExtremeWireless™ AP560i Access Point...
  • Page 40 Mount the Access Point to a Pole using the Pole Part of the KT-147407-02 Bracket Before You Begin The following hardware is required for pole installation using KT-147407-02 pole bracket part to the access point: • Pole part of the KT-147407-02 bracket • Four M6 screws ExtremeWireless™ AP560i Access Point...
  • Page 41 2. Attach the pole bracket part of the KT-147407-02 bracket to the other end of the KT-150173-01 bracket using two hex-head M12 stainless-steel screws and two hex-head M12 stainless-steel nuts. Attach the pole bracket to a pole by following steps 5, 6, and 7. ExtremeWireless™ AP560i Access Point...

  • Page 42: Install The Access Point On A Pole Using Mbo-Art02 Articulating Mounting Bracket And Pole01 Bracket

    MBO-ART02 articulating mounting bracket Cable clamps Note You must provide stainless-steel cable clamps. The band must be 0.5 in. (12.7 mm) wide. Procedure 1. Attach the MBO-ART02 articulating mounting bracket to the access point using two M6 hex-head screws. ExtremeWireless™ AP560i Access Point...
  • Page 43 Install the Access Point on a Pole Using MBO-ART02 Install the Access Point Articulating Mounting Bracket and POLE01 Bracket 2. Attach the WS-MBO-POLE01 bracket to the MBO-ART02 articulating mounting bracket using four M3 screws, nuts, and washers. ExtremeWireless™ AP560i Access Point...

  • Page 44: Install The Plastic Service Panel On The Access Point

    Note The service panel bottom opening must be closed and glued in place when not needed. The openings can be covered with at least 0.050 inches thick plastic or metal coverings. ExtremeWireless™ AP560i Access Point...
  • Page 45 1. Attach the plastic service panel base to the access point using four, 75 mm service panel shoulder screws. Figure 16: Plastic service panel base views Callout Description Plastic service panel base Side view of plastic service panel base 2. Torque the screws to 13 in-lbs. ExtremeWireless™ AP560i Access Point...

  • Page 46: Secure The Access Point After Installation

    About This Task You can secure the access point to the mounting environment using a 3 mm diameter safety cable. The safety cable is used to enhance the physical security of the access point after installation. ExtremeWireless™ AP560i Access Point...

  • Page 47: Power Or Pressure Washing Guidelines

    Use only commercially available ice-melt products. Warning Do not use cleaning agents, solvents, and ice-melt products that are flammable, contain polycarbonate or rubber dissolving ingredients, uses refined petrochemical materials, and any other materials that can damage a concrete surface. ExtremeWireless™ AP560i Access Point...
  • Page 48 The EIO-GASKET keeps debris from getting between the ramp base and a wall or a riser. For more details, see Install the EIO-04 Under-Seat Slope Bracket with the Access Point Against a Stadium Riser Slope Using EIO-GASKET on page 25. ExtremeWireless™ AP560i Access Point...

  • Page 49: Ground The Access Point

    2. Insert the ring terminal on the ground screw. 3. Thread the ground screw into the access point hole below the ground symbol. Figure 20: Ground port hole Callout Description Ground symbol Ground screw hole 4. Tighten the ground screw to 12 in-lbs. ExtremeWireless™ AP560i Access Point...

  • Page 50: Ge1 Or Ge2 Cable Connection Through The Service Panel Base

    Service panel top Figure 21: Service panel metal conduit covers Callout Description Blank conduit cover to cover the front hole on the side of the service panel base ¾ in. conduit cover ½ in. conduit cover ExtremeWireless™ AP560i Access Point...

  • Page 51: Ge1 Or Ge2 Cable Connection Through The Metal Sloping Bracket

    Two blank conduit covers to cover the front and the rear holes on the side of the service panel base • One metal sloping bracket Note The conduit cover used on the metal sloping bracket can extend above the concrete floor but, cannot extend above the slope. ExtremeWireless™ AP560i Access Point...
  • Page 52 5. Connect the GE1 LAN cable through the GE1 port until it clicks into place. If there is a GE2 connection, insert the cable through the GE2 gland until it locks into place into the GE2 port. ExtremeWireless™ AP560i Access Point...
  • Page 53 GE1 or GE2 Cable Connection Through the Service Panel GE1 or GE2 Cable Connection Through the Metal Base Sloping Bracket 6. Torque the gland cap to 12-in lbs. 7. Fold and arrange the GE1 cable into the gap of the metal sloping bracket. ExtremeWireless™ AP560i Access Point...

  • Page 54: Access Point Specifications

    0 – 95% (non-condensing) Storage and transportation temperature -40°C to +70°C (-40° F to +158° F) Electrostatic discharge 15kV air, 8kV contact Power specifications Item Description Operating voltage PoE-PD: 48-57VDC Operating current PoE-PD: 500mA at 48V ExtremeWireless™ AP560i Access Point...
  • Page 55 Access Point Specifications Power specifications Item Description PoE PD class 802.3at Power consumption Max: 22 W Idle (radios on) : 9.5 W Typical: 18 W Note For detailed product specifications, refer to the AP560i data sheet. ExtremeWireless™ AP560i Access Point...

  • Page 56: Regulatory And Compliance Information

    Installation personnel This product is designed for specific application and needs to be installed by a qualified personnel who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. ExtremeWireless™ AP560i Access Point...

  • Page 57: Installation Procedure

    • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. ExtremeWireless™ AP560i Access Point...

  • Page 58: Fcc Radiation Exposure Statement

    CE Information The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. This device complies with Conformitè Europëenne (CE) in the following countries. Table 12: Conformitè Europëenne (CE) compliance ExtremeWireless™ AP560i Access Point...

  • Page 59: All Operational Modes

    The frequency and the maximum transmitted power in EU are listed below: • 2412-2472MHz: 19.96 dBm • 2402-2480MHz (LE): 6.32 dBm • 5180-5240MHz: 22.93 dBm • 5260-5320MHz: 22.95 dBm • 5500-5700MHz: 28.84 dBm • 2405-2480MHz: 6.45 dBm BSMI RoHS Table ExtremeWireless™ AP560i Access Point...

  • Page 60: European Waste Electrical And Electronic Equipment (Weee) Notice

    Declaration of Conformity in Languages of the European Community English Hereby, Extreme Networks declares that the radio equipment type (AP560i) is in compliance with Directive 2014/53/EU. For full text of the EU Declaration of Conformity, contact Extreme Regulatory Compliance at compliancerequest@extremenetworks.com...
  • Page 61 Regulatory and Compliance Information European Community French Par la présente Extreme Networks déclare que l'appareil Radio LAN device (AP560i) est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU. Pour obtenir le texte intégral du processus de Déclaration de la conformité...
  • Page 62 Extreme Regulatory Compliance presso compliancerequest@extremenetworks.com Spanish Por medio de la presente Extreme Networks declara que el Radio LAN device (AP560i) cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU. Para obtener el texto completo de la Declaración de conformidad de la UE, póngase en...

  • Page 63: Index

    EIO-04 install 23 ART02 on POLE01 bracket 42 KT-147407-02 bracket parts 36 pole installation using KT-150173-01 extension arm 39 pressure wash ground connection nozzle information 47 ground screw 49 safety guidelines 47 ground screw hole product announcements vii, viii lightning protection 49 professional install 56, 57 ExtremeWireless™ AP560i Access Point...
  • Page 64 Index safety guidelines 56 secure the access point safety cable installation 46 service panels installation 44 specifications environmental specifications 54 physical specifications 54 power specifications 54 stadium slope install 25 support, see technical support technical support contacting vii, viii under-seat installation 20 wall install ART02 articulating mounting bracket install 34 wall installation wall install using KT-147407-02 and KT-150173-01 extension arm 33...

Table of Contents