Install The Access Point On A Wall Or Flat Surface Using The Kt-147407-02 Bracket Parts - Extreme Networks AP560i Installation Manual

Install the Access Point on a Wall or Flat Surface Using
the KT-147407-02 Bracket Parts
•
MBO-ART02 articulating mounting bracket
•
Six M6 hex-head screws
◦ Two M6 hex-head screws to attach the bracket to the access point
◦ Four M6 hex-head screws to attach the bracket to the wall or a flat surface.
Note
The cable glands must face down when you install the access point on a wall.
Install the Access Point on a Wall or Flat Surface Using the KT-147407-02 Bracket
Parts
Before You Begin
Hardware requirements for a wall or flat surface installation:
•
Flat part of the KT-147407-02 bracket
•
1-axis tilt part of the KT-147407-02 bracket
•
One access point
•
Six M6 screws
•
Four M6 headsize screws
30 ExtremeWireless™ AP560i Access Point
Install the Access Point