Extreme Networks AP560i Installation Manual page 48

Power or Pressure Washing Guidelines
Note
Do not use the power washing equipment near power lines.
Note
Wear safety goggles with complete eye protection when using the power washing
equipment.
About This Task
You can pressure wash the access point and the surface under a seat or a slope around the access point
to remove dirt and debris.
Tip
The best practice is to follow the pressure washing guidelines for longevity of the access point
parts.
Procedure
1. Use a prescribed pressure washing nozzle to wash the access point and the surface around it.
2. Keep the pressure washing nozzle at least 24 in. away from the access point.
Figure 19: Safe pressure washing procedure
Callout
1
2
3. If the stadium ramp base cannot be pressure washed from behind, the best practice is to use the
EIO-GASKET.
The EIO-GASKET keeps debris from getting between the ramp base and a wall or a riser.
For more details, see
Stadium Riser Slope Using EIO-GASKET
48 ExtremeWireless™ AP560i Access Point
Install the EIO-04 Under-Seat Slope Bracket with the Access Point Against a
on page 25.
Description
Safety goggles with complete eye protection
Pressure washing nozzle
Install the Access Point