Table of Contents
Advertisement
Installation Process
Mount the Access Point Using the Main Mounting Bracket and KT-135628-01 Adapter
to a Flat T-bar
About This Task
Mounting the AP to a suspended or a drop ceiling requires the optional adaptor (Universal Mounting Kit
for WLAN APs; # KT- 135628-01). The adaptor requires a flat T-bar and fits a ceiling tile with up to a 0.35
in. protrusion from the T-bar.
Before You Begin
•
T-bar width can be either 9/16 in. (15 mm) or 15/16 in. (24 mm).
•
T-bar bottom must be flat all the way across
•
T-bar minimum base thickness: N/A; must be structurally sound
•
T-bar maximum base thickness: 0.055 in. Due to manufacturing variation some adaptors may be
able to accommodate up to 0.060 in.
•
Ceiling tile may protrude up to 0.3 in. below the T-bar
Procedure
1. Attach the T-bar adapter by lining up the small bends on the adaptor with the long raised parts on
the main bracket, pull up on the adapter's locking pin, and twist.
Ensure that the locking pin goes into the locking pin hole on the main bracket and locks in place.
2. Slide the T-bar holder onto the T-bar and replace the tiles to hold the adaptor onto the T-bar.
3. Hold the AP and rock it back and forth to ensure that it is securely mounted.
4. Attach the Ethernet cable's RJ45 connector to the LAN1 port.
Mount the Access Point Using the WS-MBI-DCFLUSH Bracket to a Flat T-bar
About This Task
The optional WS-MBI-DCFLUSH (#37211) bracket can also be used for T-bar installations without the
mounting bracket.
Before You Begin
•
T-bar width must be 9/16 in. (15 mm), 15/16 in. (24 mm), 1.5 in. (38 mm)
•
T-bar bottom must be flat all the way across
•
T-bar minimum base thickness: N/A; must be structurally sound
•
T-bar maximum base thickness is 0.080 in. (2 mm)
•
Ceiling tile must be flat all the way across
•
Maximum ceiling tile protrusion allowed is 0.015 in. (0.38 mm)
Procedure
1. Remove the ceiling panels around the drop ceiling T-bar rail.
Mount the Access Point Using the Main Mounting
Bracket and KT-135628-01 Adapter to a Flat T-bar
ExtremeWireless™ AP510i Access Point Installation Guide
27
Advertisement
Table of Contents
