Extreme Networks AP560i Installation Manual page 35

Install the Access Point
Procedure
1. Using the MBO-ART02 articulating mounting bracket's shorter bracket end as a template, mark and
drill four holes on the wall.
Figure 11: MBO-ART02 bracket template for attachment holes
2. Attach the MBO-ART02 to the access point using two M6 hex-head screws.
3. Align the mounting holes on the MBO-ART02 articulating mounting bracket against the holes on the
wall and attach the bracket using four M6 hex-head screws.
Install the Access Point on a Wall Using MBO-ART02
Articulating Mounting Bracket
ExtremeWireless™ AP560i Access Point 35