Extreme Networks AP560i Installation Manual page 11

Hide thumbs Also See for AP560i:
Table of Contents

Advertisement

AP560i Overview
Figure 1: AP560i side ports
Callout
1
2
3
Note
The console port cap must be tightened to a torque of 12 in-lbs.
If a torque wrench is not available, a flat-bladed screwdriver can be used. The flat blade must
be 7/16 in. wide to avoid noticeable cap slot deformation.
Turn the console port cap until there is resistance from the access point gasket, and then turn
the console port cap to a minimum of ½ turn further.
Note
The slot deformation will not affect the IP67 console port cap properties.
Description
GE1 port
GE2 port
Console port
ExtremeWireless™ AP560i Access Point
AP560i Features
11

Advertisement

Table of Contents
loading

Table of Contents