Install The Access Point On A Wall Or Flat Surface Using The Kt-147407-02 Bracket Parts - Extreme Networks ExtremeWireless AP560h Installation Manual

Install the Access Point on a Wall or Flat Surface Using
the KT-147407-02 Bracket Parts
Install the Access Point on a Wall or Flat Surface Using the KT-147407-02 Bracket
Parts
Before You Begin
Hardware requirements for a wall or flat surface installation:
•
Flat part of the KT-147407-02 bracket
•
1-axis tilt part of the KT-147407-02 bracket
•
One access point
•
Six M6 screws
•
Four M6 headsize screws
Figure 5: Flat part of the KT-147407-02 bracket
22 ExtremeWireless™ AP560h Access Point
Install the Access Point