Install The Access Point On A Drywall Or Wood Wall Or To A Solid Flat Ceiling - Extreme Networks ExtremeMobility AP410i/e Installation Manual

Table 7: Brackets and accessories usage for various installation options (continued)
Mounting Wall
bracket or install
accessory
37210 flat Yes
metal easy-
attach
adapter;
used with
main
mounting
bracket
37211 WS- No
MBI-
DCFLUSH
bracket
BRKT-00014 No
7A-01; beam
clip
accessory
30525 WS- No
CAB-RJ45-
FLT01
accessory;
used with
any ceiling
bracket
Install the Access Point on a Drywall or Wood Wall or to a Solid
Flat Ceiling
The access point is installed on a drywall or wood wall or to a solid flat ceiling using:
•
#37201, stainless-steel main mounting bracket that ships with the unit
•
#30516, WS-MBI-WALL04 bracket, two Phillips pan-head screws, and screw-in anchors
Note
The WALL04 bracket and screw-in anchors are used only for drywall or wood wall
mounting.
•
#37201, stainless-steel main mounting bracket with #37210, flat metal easy-attach adapter
•
Phillips pan head screws
Tip
The best practice is to install the access point using the mounting brackets.
ExtremeMobility™ Access Points AP410i/e
Solid Ceiling Ceiling
flat install install
ceiling (T-bar) (protrude
install d T-bar)
Yes No No
No Yes Yes
No No No
Yes Yes No
Juncti Beam Ceiling tile
on box install protrusion
install
No No No
No No Yes
No Yes No
No No No
Install the Access Point
T-bar Notes
widths
N/A Wall mount,
ceiling mount,
or install on any
solid surface.
9/16 in., Protruded
3/2 in., ceiling mount
15/16 in. with varying
widths.
N/A The beam clip is
attached to the
main mounting
bracket.
N/A This accessory
can be used
only with
ceiling mount
brackets listed
in this table.
12