Gpi Input Setting (Gpi Input Assign Menu) - Sony DVS-9000 User Manual

Releasing the assignment of a GPI input port
Use the following procedure.
1
2
3

GPI Input Setting (GPI Input Assign Menu)

To set the trigger type and so on for each GPI input, display the DCU>GPI
Input Assign menu.
To display the GPI Input Assign menu
In Engineering Setup, select VF5 'DCU' and HF2 'GPI Input Assign.'
The GPI input port setting status appears in the status area.
Making DCU GPI input settings
Use the following procedure.
1
2
128
Setup Relating to DCU
In the DCU>Input Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
Turn the knobs to adjust the following parameters.
Knob Parameter
1 From No
2 To No
In the <Parallel Input Assign> group, press [No Assign].
In the DCU>GPI Input Assign menu, using any of the following methods
select what the setting applies to.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn knob 1 to make the setting.
Knob Parameter
1 No
In the <Trigger Type> group, select the trigger polarity.
: Apply the trigger on a rising edge of an input pulse.
: Apply the trigger on a falling edge of an input pulse.
Adjustment
First port number
Last port number
Adjustment
GPI input
Setting values
1 to To No
From No to 102
Setting values
1 to 50