Table of Contents
Advertisement
Advanced Settings
To go to the Advanced Settings make sure you have logged in to the MyZone Configuration Manager (refer to the MyZone Configuration Manager section
previous). Once you have logged in to the MyZone Configuration Manager, click on the 'Switch to Advanced View' tab at the bottom left of the window as
shown below to take you to the Advanced Menu.
4.1. Status Menu
You are now in the Advanced Menu and may begin configure the advanced features of your MyZone.
There are 4 main categories on the status page of the advanced menu –
•
System Information: This section shows you the system up time, router version and phone module version. Under 'Router Version' you will
see'Hardware' and a 'Software' section. For all future software updates please make sure you check the software version before you perform an
upgrade.
•
WWAN (3G): This section shows you the details of your 3G connection. It shows your status, APN (Access Provider Network) and your IP address.
•
Connection Status: This section shows you more details on your connection such as your provider, IMEI (International Mobile Equipment Identity),
signal strength and your SIM status.
•
Battery Status: This section shows your battery status. It tells you what percentage of your battery life remains and whether it is currently charging
or not.
Note:
If you would like to return to the basic interface of the MyZone Manager at any point, please click on the 'Home' tab at the top left of the Advanced Menu page.
YML24W-RAU
www.netcomm.com.au
NETCOMM LIBERTY SERIES - MyZone Mobile 3G WiFi Router
MyZone User Guide
23
Advertisement
Table of Contents
