Advanced Settings; Advanced Settings > System Log - NetComm N150 User Manual

Advanced Settings

The Advanced Settings page allows you to configure the advanced settings on the router such as the System log and System time . Click
on any of the menu items on the left to configure the associated settings.
Advanced Settings > System Log
This enables you to set up the system log feature of the router. You can also choose to export the system log via email (SMTP) or send it to
a remote syslog server (UDP).
IP address for Syslogd server
The IP address of the syslog server where the syslog information will be sent to. Click the "Enable" checkbox to enable this function.
Setting of Email alert
Check if you want to enable Email alerts (send syslog via email). Click the "Enable" checkbox to enable this function.
SMTP Server IP and Port
Enter the SMTP server IP (or FQDN) and port, separated by a ':'. If you do not specify port number, the default value is 25.For example,
"mail.your_url.com" or "192.168.1.100:26".
SMTP username and password
Enter the user account and password for the SMTP server.
E-mail address
The recipients who will receive these logs, you can assign more than 1 recipient, using ';' or ',' to separate the email addresses.
E-mail Subject
The subject of email alert, this setting is optional.
View Log...
View the current system log.
YMLM1WN
www.netcomm.com.au
NetComm Liberty Series - 3G Wireless N150 Mini Router m1
3G Wireless N150 Mini Router m1-User Guide
33