Virtual Server
To configure Virtual Server, go to: Network >> Network Address Translation >> Public Accessible Server
This function allows the administrator to set 40 virtual servers at most, so that client devices outside the managed network can
access these servers within the managed network. Different virtual servers can be configured for different sets of physical services,
such as TCP and UDP services in general. Enter the "External Service Port", "Local Server IP Address" and "Local Server Port".
Select "TCP" or "UDP" for the service type. In the Enable column, check the desired server to enable. These settings will become
effective immediately after clicking the Apply button.
NetComm Wireless HS1200N Wireless N Hotspot
66
www.netcommwireless.com