Table of Contents
Advertisement
Port Forwarding
This page allows you to configure port forwarding rules to allow remote users to access services such as Web (HTTP) or FTP on
your local computers. This allows you to redirect a particular port number or port range (from the Internet/WAN port) to a
particular LAN IP address on your local network.
OPTION
Virtual Server Setting
IP Address
Port Range
Protocol
Comment
Click Apply to save any changes you make to the settings.
www.netcommwireless.com
Figure 44 - Advanced View - Port Forwarding Settings
Select to Enable or Disable the virtual server (port forwarding) function.
The LAN IP address that a public incoming packet will be sent to.
The public port number or port range to be sent to the specific LAN IP address. If the rule is to be set for a
single port, enter the same number in both fields.
Select the protocol type (TCP, UDP or both) for the port forwarding rule to transmit data packets with. If you
are unsure use the default "TCP&UDP" setting.
Add a comment to identify the rule (optional).
Table 27 - Advanced View - Port Forwarding Settings
DEFINITION
NetComm Wireless 3G27WV-02 User Guide
50
Advertisement
Table of Contents
