Advertisement
High Priority QoS Queue Configuration
13. Select Advanced > Quality of Service > Queue Config.
14. Click the Add button.
15. Enter a name of 15 characters or less to reflect the device will use high priority QoS – eg. PC1HighPriority
16. Set Enable to "Enable".
17. Set the Interface (Australian customers use atm0(0_8_35), NZ customers use atm0(0_0_100)).
18. Enter a Precedence. For the highest priority set it to 1. For the lowest priority use 3.
19. Set the DSL Latency as Path0.
20. Click the Apply/Save button.
Advertisement
