Vsa Configuration In Radius Server (Ias Server) - NetComm HS1200N User Manual

If the amount of traffic is larger than 4 GB, the attributes of "XXXX-4GB" will be used. For example, if the amount is 5 GB, the
following settings should be set: "HSG-Byte-Amount = 1048576" and "HSG-Byte-Amount-4GB = 1".
On the other hand, when the administrator fills in all attributes, the user will be kicked out from the system if any condition is
reached. For example, if the administrator sets "HSG-Byte-Amount = 1048576"; "HSG - MaxByteIn = 1048576" and "HSG-
MaxByteOut = 1048576", the user will be kicked out of the system when the downlink, uplink, or total traffic exceeds the limit.

VSA configuration in RADIUS server (IAS Server)

This section will guide you through a VSA configuration in your external RADIUS server. Before getting started, please directly or
remotely access your external RADIUS server's desktop from other PC.
Step 1
Confirm the following key elements in the RADIUS server: users, groups, and policies.
Verify whether there are already users in the RADIUS Server.
Verify whether there are already Groups and assigned users belonging to these Groups in the RADIUS Server.
Verify whether there are already Policies and assigned Groups belonging to these Policies in the RADIUS Server.
Step 2
Run "Internet Authentication Server" and open "Remote Access Policies"
Right-click Policy and scroll down to the Properties page
Step 3
Click Edit Profile and select the Advanced Tag.
Click Add to add a new Vendor-specific attribute.
NetComm Wireless HS1200N Wireless N Hotspot
114
www.netcommwireless.com