Basic Settings > Change Password - NetComm N150 User Manual

Basic Settings > Change Password
On this page you can change the NetComm m1 web based user configuration password. Please type in your old password
(The factory default password is "admin") and then type in the new password. Type the same new password in the Reconfirm field.
Note: if you change the password, please make sure that you use the new password the next time you log into the web based user configuration.
Click "Save" to save the settings or "Undo" to cancel.
3G Wireless N150 Mini Router m1-User Guide
26
YMLM1WN
www.netcomm.com.au