Change Apn - NetComm NTC-402 Configuration Manual

Change APN

3 Open Basic Network >> WAN & Uplink and click the Internet Setup tab:
4 Click the Edit button for WAN-1, additional groups of settings will display below the Internet Connection List
table.
5 Scroll down to the Connection with SIM-A Card section:
6 Enter the following details in this section of the page:
I T E M
Network Type
Dial-Up Profile
APN
NTC-402 – Telstra Private IP WAN Configuration Guide
CG01068 v. 1.0 October 2018
Figure 2 – Basic Networking > WAN & Uplink > Internet Setup tabbed page
Figure 3 – Connection with SIM-A Card section of the Internet Setup tabbed page
D E S C R I P T I O N
Use the default setting: Auto
Manual Configuration – this will open the APN field on the
next line.
Enter the APN (Access Point Name) of your service
provider.
T E L S T R A S E T T I N G S
Auto
Manual Configuration
telstra.corp
© NetComm Wireless 2018
6 of 11