Connecting Via An Ethernet Cable - NetComm NF5 Quick Start Manual

THANKS FOR PURCHASING NETCOMM WIRELESS
FROM BOOM BROADBAND
This quick start guide is designed to get you up and running quickly with your new router. More
advanced set up instructions can be found in the user manual which can be downloaded from
www.netcommwireless.com
SET UP YOUR ROUTER
Take the supplied power adapter and attach it to the Power socket on the rear of the
1.
router and connect the other end of it to a wall plug power source.
For use with a fixed line connection, attach the Ethernet cable provided to the blue WAN
2.
port on the back of the router. Attach the other end to your NBN CONNECTION BOX.
Usually you will need to connect to the UniD1 port.

CONNECTING VIA AN ETHERNET CABLE

Connect the Ethernet cable provided to one of the yellow LAN ports on the back of the
1.
NF5 router.
Connect the other end of the yellow Ethernet cable to your computer.
2.
NOTE: There is only one Ethernet cable supplied. If you require more than one Ethernet cable, any standard Ethernet cable is suitable.
WPS/
ON/OFF RESET
WPS/
ON/OFF
RESET
WPS/
ON/OFF RESET