Advertisement
CONNECTING THE ROUTER TO THE INTERNET
Via a 3G/4G USB modem
After completing the hardware installation, you must configure the router to be able to connect
to your Internet Service Provider. This is done with an easy to use set-up wizard that will guide
you through the process
1.
On your computer, open a web-browser (such as Internet Explorer, Firefox, or Safari),
type 192.168.20.1 into the address bar at the top of the screen and press Enter.
2.
At the login screen, type admin into the username and password field and then click
Login to continue. This will take you to the First-time Setup Wizard page.
3.
Click Yes, let's get started with the wizard to begin configuring your 4GM3W.
4.
Use the drop down menus to select the country and service provider with which
you will be using your router. In the PIN and Confirm PIN fields, enter the PIN number
provided to you by your carrier to unlock the SIM card. Click Next to continue
Please note: If you are using the BigPond service in Australia, you are required to enter the username and password provided to you by
BigPond to access the service.
5.
Select settings for the 2.4GHz WiFi network. You can turn the Wireless 2.4GHz (WiFi)
on or off, choose whether you want the SSID Broadcast on or off, or change the SSID
Broadcast Name. To keep the current settings, click Next.
6.
The router is preconfigured with wireless security but if you wish to change these settings
use the Security Key Type drop down menu to select a wireless security key type and
enter a security key in the Security Key field. To keep the current settings, click Next.
7.
Repeat steps 5 and 6 for the 5GHz WiFi settings.
8.
Change the username and password required to login to the web based user interface
pages. By default, the username and password are admin. To keep the current settings,
click Next.
9.
Once finished, click on Finish and allow the router approximately one minute to
complete the configuration.
•
If you are connected successfully, the Internet light will be illuminated green.
•
If the Internet light is red or not illuminated, check your settings and try again.
3G/4G Dual Band AC WiFi Router - 4GM3W
Advertisement
