Ethernet Installation; G Wireless Router - NetComm N3G002W Quick Start Manual

3G Wireless Router

Mac Quick Start Guide
Ethernet
Installation
Step 1 – Install the Hardware
To connect your N3G002W using the Ethernet cable, follow these step-by-step instructions:
> Connect the Ethernet cable.
Connect one end of the Ethernet cable provided to the Ethernet port on your Mac and the
other end of the cable to the Ethernet port of your N3G002W.
> Insert your 3G PC Card
Carefully insert the 3G card into the N3G002W slot until it is firmly fitted.
> Attach the power connector.
Connect the AC power adapter to the Power connector on the back of the N3G002W and
plug in the adapter into a wall outlet or power strip.
Switch on the power.
>
Your N3G002W will start up. Turn on your Mac.
Step 2 – Set up your Mac
This is how to configure your N3G002W to work with the Mac OS X (10.5.4 Leopard)
1. From the Apple menu, select System Preferences.