4.5.5. Fitting the Battery Cables
14
10
Battery Terminal Cover
1. Remove the left-hand Battery Terminal Cover from Battery 4
2. Fit the Battery Cable Live (Grey) –ve and secure with the Cable Lug Fixings.
3. Tighten the Cable Lug Fixings to the torque recommended by the battery
manufacturer.
4. Refit the Battery Terminal Cover to Battery 4.
5. Remove the right-hand Battery Terminal Cover from Battery 1
6. Fit the Battery Cable Common (Blue)+ve and secure with the Cable Lug Fixings.
7. Tighten the Cable Lug Fixings to the torque recommended by the battery
manufacturer.
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
10
Battery Cable Live (Grey) –
14
ve
Fig. 4-7 Fitting the Battery Cables
Document No: - 4493-CM-EN-10989402
Flexi -3G Installation & Commissioning Manual
Chapter 4. Battery Installation
10
10
10
15
15
Battery Cable Common
(Blue)+ve
Page 43 of 94