Important Notes; Symbol Key; Information On The Operating Manual; Applicable Documents - Eaton LoadStar-S JSB Mounting And Operating Instruction

1 Important Notes

1 Important Notes

1.1 Symbol Key

Important technical safety information in these operating in-
structions is indicated by symbols. It is imperative that these
safety instructions are adhered to. WARNING! DANGER!
RISK OF INJURY OR DEATH!
ATTENTION! DAMAGE TO
PROPERTY!
This symbol indicates instructions which, if not observed,
may result in damage to health, injury, permanent bodily
injury or death
ATTENTION! DAMAGE TO PROPERTY
This symbol indicates instructions which, if not observed,
can lead to material damage or even a total breakdown of
the system.
This symbol denotes tips and information on practices or how
to handle the described appliances and plant components
that are important for smooth operations.

1.2 Information on the Operating Manual

This operating manual describes how to handle the device
safely and correctly. The safety instructions and information
provided as well as local accident prevention regulations ap-
plicable to the area of operation and general safety measures
must be observed.
Please read the operating manual in full, in particular the
chapter on safety and the relevant safety instructions, before
beginning any work on the equipment.
The illustrations and circuit diagrams in this manual are in
part solely for the purpose of providing visuals for the matters
described in the documents. Whenever:
• exact measurements or
• precise illustrations and circuit diagrams tailored to the
specifics of the location are required,,
the illustrations and plans that have been specially drawn up
for the lighting installation must be followed exactly.

1.3 Applicable Documents

Components from other manufacturers are incorporated into
the equipment (e.g. batteries). These additional components
are subject to the manufacturer's risk assessments. Com-
pliance of these constructions with current European and
national regulations has been certified by the manufacturers
of these components.
4
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
NOTE!

1.4 Liability and Warranty

All the information and instructions in this operating manual
were drawn up in accordance with the valid provisions, the
latest state of technology and based on our many years
knowledge and experience.
The operating manual must be kept in direct proximity to
the central battery system, where it must be accessible to
anyone who works on or with the system.
The operating instructions should be read through carefully
prior to performing any work on or with the equipment!
CEAG Notlichtsysteme GmbH accepts no liability and/or
warranty for any defects that could occur in connection with
the delivery and installation of Eaton emergency lighting
systems and lights by virtue of other norms and regulations
that are prescribed in all-in-one packages in connection with
Eaton products. In addition please observe all laws, norms
and guidelines of the country in which the equipment is set
up and operated.
Eaton accepts no liability or warranty for damage or conse-
quential damage caused by
• improper use,
• non-compliance with the regulations and safeguards for
the safe operation of the equipment,
• non-authorized modifications or modifications carried out
by non-specialists to the connections and settings of the
equipment or to programming,
• the operation of unauthorized or unsuitable devices or
groups of devices with the LoadStar-S system.

1.5 Copyright

All material information, texts, drawings, pictures and other
illustrations are protected in accordance with copyright law.

1.6 Spare Parts

Only use the manufacturer's original spare parts.
ATTENTION!
Incorrect or faulty spare parts can result in damage, malfunc-
tions, or a complete failure of the equipment. In the event of
the use of unauthorized replacement parts, all guarantee, ser-
vice, compensation and liability claims become null and void.

1.7 Disposal

Packaging materials are not waste material but valuable
assets that can be re-used or recycled.
Eaton has been awarded the recycling certificate issued by
INTERSEROH GmbH. The contract number is 85405. This
guarantees that all registered packaging material is reused
and all the requirements of the Packaging Ordinance are
fulfilled