Connections; Compatible Software - Eaton Flexi-3G Installation & Commissioning Manual

Flexi -3G Installation & Commissioning Manual
Chapter 2. Flexi - 3G System General Description

2.4.2. Connections

18
7
2
8

1 SC200 system controller
3 Voltage feed module
5 Ethernet communications
7 Digital relay outputs (6) to external devices
and/or alarm indication system
9 Connection to additional I/O board(s) and/or
SiteSure-3G I/O module(s)
 1 1 Connection to dc live bus
13 DC power system digital inputs (Load Fuse
Fail, Battery Fuse Fail, AC Distribution Fan
Fail, AC Distribution MOV Fail) 
 1 5 Connection to temperature sensors (2)
17 Optional LVD1 contactor and auxiliary switch
19 Bus voltage sense connection
For connector pin-outs, see document no IPN 997-00012-50, SC200 System Controller Operation
Handbook.

2.5. Compatible Software

The following software is compatible with the SC200 system controller:
•
DCTools Configuration Software. Latest version is available free from
www.powerware.com/downloads
Page 16 of 94
17
13
Fig. 2-8System Connections
Document No: - 4493-CM-EN-10989402
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
6
4
5
20
16
15
14
19
2 I/O board
4 USB communications
6 RS232 communications
8 Digital inputs (6) from external voltage-free
switches or relay contacts
 1 0 Connection to dc common bus
12 Communications to rectifiers
14 Connections to battery mid-points (4)
16 Connection to current sensors (3)
18 Optional LVD2 contactor and auxiliary switch
20 I/O power and RXP comms connection
.
1
9
12
11
10
3