Assembling The Battery Cabinet; Positioning The Side Panels - Eaton Flexi-3G Installation & Commissioning Manual

Flexi -3G Installation & Commissioning Manual
Chapter 3. Installation Procedure

3.3. Assembling the Battery Cabinet

3.3.1. Positioning the Side Panels

1
1 Side Panel LH
1. With the aid of an assistant, position the Side Panel LH and Side Panel RH, on a level surface,
approximately 600mm apart, as shown in Fig. 3-2 above
Page 24 of 94
Fig. 3-2 Positioning the Side Panels
Document No: - 4493-CM-EN-10989402
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
1
2
2
2 Side Panel RH