Fitting The Batteries; Fitting Battery 1 - Eaton Flexi-3G Installation & Commissioning Manual

4.5. Fitting the Batteries

4.5.1. Fitting Battery 1

3
1
2
1 Battery Cabinet
6 Battery block1
1. Fit Battery 1 into the position shown in Fig. 4-3 above, aligning the front edge of the
battery with the front of the battery shelf.
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
Flexi -3G Installation & Commissioning Manual
2 Battery Shelf 1
10 Battery Terminal Cover
Fig. 4-3 Fitting Battery 1
Document No: - 4493-CM-EN-10989402
Chapter 4. Battery Installation
10
6
3 Battery Shelf 2
Page 39 of 94