Eaton Flexi-3G Installation & Commissioning Manual page 90

Flexi -3G Installation & Commissioning Manual
Chapter 9. Appendices
DC CIRCUITS
Supply Characteristics
Supply type (Flexi - 3G, etc.):
Location type (raised floor or solid, overhead ironwork or not):
DC cable access (top or bottom):
Installed rating, kW:
Nominal Voltage (48):
Earth Connections
Power system to Common Earth Point.
New System Insulation
NEW SYSTEMS ONLY, BEFORE LOAD CONNECTED,
isolate primary & check dead; link primary phases & neutral,
link DC live & return
Links removed and supply restored:
DC Cables
(those installed as part of this job only)
Load
Cct Destination
No
1
2
3
4
5
6
7
8
9
10
11
12
13
Harmonised Colours
Installation connects to existing wiring with non-harmonised colours, Yes/No?
If installation connects to existing wiring with non-harmonised colours, warning label(s) fitted, Yes/No?
Test Engineer Name:
Test Engineer Signature:
* To be completed by the user
Page 90 of 94
Load Max
rating, run,
*
kW m
Document No: - 4493-CM-EN-10989402
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
Planned final rating,
Polarity (negative live/positive live):
c.s.a., Number cores in
2
mm parallel
Insulation DC/AC,
MΩ:
Run
Protection
length Cable
A
*
m
Return:
Return:
Return:
Return:
Return:
Return:
Return:
Return:
Return:
Return:
Return:
Return:
Return:
Company Name or OUC:
Date:
kW:
Run Length,
m
Insulation DC/Earth,
MΩ:
Cable
No. in Colou Polarit
c.s.a.,
// r
2
mm
Live:
Live:
Live:
Live:
Live:
Live:
Live:
Live:
Live:
Live:
Live:
Live:
Live:
y +/-