Advertisement
Flexi -3G Installation & Commissioning Manual
Chapter 4. Battery Installation
4.5.4. Fitting the Battery Links
3
1
2
9
1
Battery Cabinet
6
Battery 1
9
Battery 4
12
Battery Link 2-3
1. Remove the left-hand Battery Terminal Cover from Battery 1 and the right-hand Battery
Terminal Cover from Battery 2
2. Fit the Battery Link 1-2 and secure with the Link Fixings.
3. Tighten the Link Fixings to the torque recommended by the battery manufacturer.
The torque for the Link Fixings will be on the battery label.
4. Refit the Battery Terminal Covers to Batteries 1 & 2
5. Remove the left-hand Battery Terminal Cover from Battery 2 and the right-hand Battery
Terminal Cover from Battery 3
6. Fit the Battery Link 2-3 and secure with the Link Fixings.
7. Tighten the Link Fixings to the torque recommended by the battery manufacturer.
8. Refit the Battery Terminal Covers to Batteries 2 & 3.
9. Remove the left-hand Battery Terminal Cover from Battery 3 and the right-hand Battery
Terminal Cover from Battery 4
10. Fit the Battery Link 3-4 and secure with the Link Fixings.
11. Tighten the Link Fixings to the torque recommended by the battery manufacturer.
12. Refit the Battery Terminal Covers to Batteries 3 & 4.
Page 42 of 94
13
12
8
7
2
Battery Shelf 1
7
Battery 2
10
Battery Terminal Cover
13
Battery Link 3-4
Fig. 4-6 Fitting the Battery Links
Document No: - 4493-CM-EN-10989402
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
11
6
3
Battery Shelf 2
8
Battery 3
11
Battery Link 1-2
10
Advertisement
Chapters
