Loading The Battery Shelves; Checking The Batteries - Eaton Flexi-3G Installation & Commissioning Manual

Flexi -3G Installation & Commissioning Manual

Chapter 4. Battery Installation

4.3. Loading the Battery Shelves

Battery Cabinet

Battery Shelf 3 (Optional)

For stability when placing the Power Cabinet onto the Battery Cabinet, it is essential to secure the

Battery Cabinet to the floor. See section 3.4. Securing the Battery Cabinet on page 30.

Batteries must be loaded into the Battery Cabinet starting with Battery Shelf 1 (Bottom Shelf). This is

to ensure that the Battery Cabinet remains stable.

1. Check each battery for physical damage.

2. Check that the Terminal Adaptor to Battery Fixings on each battery are tight

3. Measure the open circuit voltage of each battery.

4. Reject any batteries that are damaged or faulty.

Page 38 of 94

Batteries placed on Battery

Shelf 1

Battery Shelf 4 (Optional)

Fig. 4-2 Battery Cabinets with 4and 5 Shelves of Batteries

Document No: - 4493-CM-EN-10989402

Batteries placed on Battery

Shelf 2

Battery Shelf 5 (Optional)

Table of Contents