Load Cable Installation; Remove Panels (If Fitted) - Eaton Flexi-3G Installation & Commissioning Manual

Flexi -3G Installation & Commissioning Manual
Chapter 7. Installation of DC Cables

7.2. Load cable installation

7.2.1. Remove panels (if fitted)

1 Power Cabinet
1. Check that the load MCB(s) being worked on are switched off.
2. Remove the 2 plastic push rivets securing the optional DC Distribution Cover Insulator to
the Power Cabinet, remove the cover and set aside.
Page 66 of 94
Fig. 7-1 Power Cabinet
Document No: - 4493-CM-EN-10989402
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
2 DC Distribution Cover Insulator
1
2