Configure User Accounts; Configure User Account Settings - Spectra Stack Tape Library User Manual

CHAPTER 3 - CONFIGURING THE LIBRARY
C
ONFIGURE

Configure User Account Settings

Logged in as a Security user or an Administrator user, from the Configuration > User
Accounts > User Accounts Settings screen you can set the password rules that apply
for all users.
Note: When the settings are changed, they are applied to new passwords. Existing
passwords remain the same.
Figure 41 The User Account Settings screen.
Configure Password Rules
Select any password rules that you want to apply and then click Submit.
• Minimum Number Of Characters—Choose the minimum password length. The
factory default value is 8. Possible range for this option is from 8 to 20. The
maximum password length is 128.
• Minimum Number Of Upper Case Alphabetic Characters (A-Z)—Choose the
minimum number of upper case alphabetic characters. The factory default value is
0. Possible range for this option is from 0 to 3.
JANUARY 2023
U A
SER CCOUNTS
95
SPECTRA STACK LIBRARY
USER GUIDE