Configuring Kmip - Spectra Stack Tape Library User Manual

CHAPTER 3 - CONFIGURING AND USING ENCRYPTION
C KMIP
ONFIGURING
If you plan to use KMIP encryption key management in some or all of your partitions,
use the Key Management Interoperability Protocol (KMIP) Wizard to configure use of
KMIP key management servers with the library. Access to the wizard from the
Encryption menu on the RMI is only available to the Security user and requires the
KMIP license key (see Configuring and Using Encryption on page 109).
For additional information on configuring KMIP servers for use with the library, see
the documentation that came with your KMIP server.
Before running the wizard, verify that:
• The library configuration is complete, including defining all library partitions.
• The KMIP server is available on the network and has been configured for use with
this library.
Use the following instructions to set up KMIP encryption management.
1. Select Configuration > Encryption > KMIP Wizard. The Wizard Information
screen displays.
Figure 58 The KMIP Wizard Information screen.
SPECTRA STACK LIBRARY
JANUARY 2023 112
USER GUIDE