Configuring Tape Drives - Spectra Stack Tape Library User Manual

CHAPTER 3 - CONFIGURING THE LIBRARY
C
ONFIGURING
You can see and modify drive configuration from the Configuration > Drives screen.
Figure 28 The Drives Settings screen.
Click the drive number to expand the section. The following information displays for
each tape drive:
Field
Drive Number
Serial Number
LTO generation
Drive form factor
JANUARY 2023
T D
APE RIVES
Description
Tape drives are numbered from the bottom of the library up to the
top beginning with "1". The drive currently hosting the SCSI
communication for the library is designated with (LUN).
The serial number assigned to the tape drive by the Spectra Stack
library. This serial number is reported to host applications. The
serial number cannot be modified.
Note: This is not the serial number assigned to the tape drive by the
tape drive manufacturer; the serial number assigned by the
manufacturer is shown in
Manufacturer S/N.
The LTO generation of the drive.
• HH - half height
81
SPECTRA STACK LIBRARY
USER GUIDE