Using The Operator Control Panel - Spectra Stack Tape Library User Manual

CHAPTER 2 - USING THE BLUEVISION INTERFACE
U
SING THE
The OCP has a power button, an LCD touch screen, five indicator LEDs, and a USB
port (see Figure 3 on
most library functions from the library LCD screen on the controller module. To
navigate the OCP, click on the LCD touch screen.
Front Panel LED Indicators
Indicator
Module ID
Ready
Clean
Attention
Error
JANUARY 2023
O
PERATOR
page 32). With the OCP you can monitor, configure, and operate
Meaning
Blue when activated. The unit identification (UID) LEDs are
controlled by the user through the OCP and RMI Maintenance > UID
LED Control screen. The UIDs on the OCP and back panel UID are
activated and deactivated together. The UIDs are helpful for locating
the library in a data center.
Steady green when the library is on, and blinking green when there is
library robotic assembly activity.
Amber when a tape drive requires cleaning.
Amber blinking if the library detects a condition for which user
attention is necessary, but which does not prevent the library from
performing most operations.
Amber if an unrecoverable tape drive or library error occurs. A
corresponding error message displays on the LCD screen. User
intervention is required; the library is not capable of performing some
operations.
C P
ONTROL
48
ANEL
SPECTRA STACK LIBRARY
USER GUIDE