Override A Poor Cartridge Health Report - Spectra Stack Tape Library User Manual

CHAPTER 6 - CONFIGURING AND USING MEDIA LIFECYCLE MANAGEMENT
6. Click Submit to send the report to the selected destination. Click Close to return
to the MLM Reports screen without sending the report.

Override a Poor Cartridge Health Report

Under certain circumstances you may need to override the health of an MLM-enabled
cartridge that is reported as poor (a red health icon appears next to the cartridge
barcode). When the cartridge health is poor, a green arrow appears that can be used
to override the reported health.
During the override process, the library progressively eliminates any recent hard
errors from the tape health calculation until the cartridge health returns to either
Good or Average.
IMPORTANT
Use the following steps to reset the health of a single cartridge.
1. Display the Media Health report as described in
page 175.
2. Locate the barcode of the cartridge for which you need to reset the health (see
Step Chapter 6 on
3. Click the green arrow button for the cartridge. The library adjusts parameters
used to calculate the tape health until the reported health is Average.
JANUARY 2023
Do not reset the cartridge health unless you believe that the reported poor
health is due to drive problems and not the cartridge or you are specifically
directed to do so by Spectra Logic Technical Support.
page 169).
Generate MLM Reports on
182
SPECTRA STACK LIBRARY
USER GUIDE