Spectra Stack Tape Library User Manual page 167

CHAPTER 5 - VIEWING LIBRARY STATUS
Field
Link Speed
Duplex
IPv4 Settings
DHCP
Address
Netmask
Gateway
DNS 1
DNS 2
IPv6 Settings
Stateless
Addressing
Static Addressing
JANUARY 2023
Description
Speed of the Ethernet connection to the library.
Enabled or disabled.
When Enabled, the library requests an IP address
from a DHCP server each time the library is powered
on.
The IP address in use by the library. If DHCP is
enabled, this address was obtained from the DHCP
server. If DHCP is disabled, the address was
manually configured.
The network mask of the library controller used
when DHCP is disabled.
The gateway used when DHCP is disabled.
The first domain name server to access.
The second domain name server to access.
When enabled, the library generates an address for
itself based on the routing information obtained from
a router advertisement and the MAC address. The
library can manage up to five global addresses at the
same time, which can be assigned from different
routers.
When enabled, the library uses a statically-configured
address.
167
SPECTRA STACK LIBRARY
USER GUIDE