Resetting To The Default Settings - Spectra Stack Tape Library User Manual

CHAPTER 3 - CONFIGURING THE LIBRARY
4. If you are using the OCP to restore the configuration file from a USB device,
copy the configuration file you want to restore onto the USB device and remove
any other configuration files from the USB device.
Note: If multiple library configuration backups are present on the USB device, the library
uses the most recent backup to restore the configuration.
Insert the USB device containing the configuration file into one of the USB ports
on the controller module.
5. Select the source location:
• RMI — (RMI only) Restores the configuration file from the computer running
the RMI. Select Choose File and use your web browser to select the
configuration file you want to restore.
• USB Device — (OCP only) Restores the configuration file from a USB device
inserted into the USB port on the front or the back of the library.
6. Click Upload File & Restore. The library reboots to restore the configuration.

Resetting to the Default Settings

To reset the library configuration to the default settings, you must be logged in as the
Administrator or Security user.
1. Log in as the security user.
2. Navigate to the Configuration > System > Save/Restore Configuration screen
shown above.
3. If necessary, click Reset Default Settings to expand the section.
4. Click Reset Default Settings.
For the detailed listing of the default settings, see
JANUARY 2023
Default Settings on
64
page 269.
SPECTRA STACK LIBRARY
USER GUIDE