Export The Encryption Key - Spectra Stack Tape Library User Manual

CHAPTER 3 - CONFIGURING AND USING ENCRYPTION

Export the Encryption Key

Use the following steps to export the current encryption key:
1. Access the encryption feature (see
2. If you want to export the encryption key to a USB device, plug a USB device
into the USB port on the Controller Module.
3. From the Configuration > Encryption > Encryption Standard screen, click Export
Key. The Export Key dialog box displays.
Figure 74 The Export Key dialog box.
4. On the Export Key screen, enter and verify a password using any combination
of the numbers 0–9, lower and upper case alphabetic characters (a–z and A-Z),
and the at symbol (@), dash (–), underscore (_), and period (.) characters. This
password is used to encrypt the exported key.
JANUARY 2023
Log Into Encryption Standard on
126
page 119).
SPECTRA STACK LIBRARY
USER GUIDE