Table of Contents
Advertisement
CHAPTER 3 - CONFIGURING THE LIBRARY
3. Using the drop-down menu, select one of the three default IP address ranges
that is not used by your external network.
Note:
If none of the three pre-entered address ranges is suitable for use in your network,
contact Spectra Logic Technical Support.
Figure 25 Select an IP address range using the drop-down menu.
4. Click Set and Proceed. The library reboots and displays the login screen (see
Figure 9 on
JANUARY 2023
page 51).
75
SPECTRA STACK LIBRARY
USER GUIDE
Advertisement
Table of Contents
Need help?
Do you have a question about the Stack Tape Library and is the answer not in the manual?
Questions and answers