Operation Problems; Power Problems; Failure/Attention Indications Displayed On The Operator Control Panel - Spectra Stack Tape Library User Manual

CHAPTER 8 - LIBRARY TROUBLESHOOTING
O
PERATION

Power Problems

Problem
Library does not
power on
No message
appears on the
OCP display
Failure/Attention Indications Displayed on the Operator
Control Panel
If the problem persists, contact Spectra Logic Technical Support. See
Spectra Logic on
Problem
The OCP displays
a warning or
error icon
The OCP displays
an error code
JANUARY 2023
P
ROBLEMS
Solution
1. Check all power cord connections.
2. Check the LEDs on the power supplies.
3. Make sure the power button on the front panel has been
pressed, and the green Ready LED is lit.
4. Make sure the outlet has power. Try another working outlet.
5. Replace the power cord.
1. Check all power cord connections.
2. Check the LEDs on the power supplies.
3. Make sure the power button on the front panel has been
pressed, and the green Ready LED is lit.
4. Make sure the outlet has power. Try another working outlet.
page 11.
Solution
Click the icon to see more information about the event on the OCP.
Look up the error code, try to resolve the failure, and power cycle the
library (see Event Codes on page 227).
216
Contacting
SPECTRA STACK LIBRARY
USER GUIDE