Table of Contents
Advertisement
3.2.5
ACQUITY UPC
The instrument settings parameters available for the UPC
detector.
See also:
The console online Help for more information.
3.3
Creating methods in MassLynx software
If you are using MassLynx software, you create an inlet method to use in conjunction with an inlet
system, such as an ACQUITY UPC
To create an inlet method in MassLynx software, click the Instrument area in the MassLynx main
window. Use the Configuration Wizard to select the pump, autosampler, and detector that you are
using, and then specify settings for acquiring data.
Notes:
•
When specifying column managers, note that they are configured as detectors.
•
Waters pump control must be configured as the pump when the ccBSM, ISM or 515
makeup pump is used.
•
You create methods offline. During offline method creation, all possible column positions,
temperature-set zones, and external valve positions are available. An error message
appears if you create a method that calls for a feature that does not exist in a current
configuration.
See also:
The MassLynx software online Help.
2
PDA instrument method settings
2
system.
November 16, 2016, 715004521 Rev. C
Page 38
2
PDA are identical to those for the PDA
Advertisement
Table of Contents
