Table of Contents
Advertisement
6
Maintenance
This chapter provides the maintenance guidelines and procedures necessary to maintain
the instrument's performance.
Follow a maintenance schedule, and perform maintenance as required and described in
this chapter.
6.1
Maintaining the ACQUITY UPC
Consult the following documentation on the ACQUITY UPC
maintaining the ACQUITY UPC
•
ACQUITY UPC
•
ACQUITY UPLC Column Manager - Active and Column Manager - Auxiliary Overview and
Maintenance Guide
•
ACQUITY 30-cm Single-Zone Column Manager Overview and Maintenance Guide
•
ACQUITY UPC
•
ACQUITY UPC
•
ACQUITY UPC
Guide
6.2
Maintaining the ABPR
The ccManager's ABPR contains mechanisms that control system pressure while the system is
running. The preheated ABPR prevents freezing when the CO
See also:
The console online Help for more information about the ABPR health test.
Note:
The ABPR health test cannot be performed when an ELSD or MS splitter is connected.
Temporarily isolate the PDA detector outlet of the flow cell to the ccManager inlet tee.
6.2.1
Running an ABPR health test when the system includes a
CM-30S
The ABPR health test ensures the UPC
ABPR health test before starting the system and after performing maintenance on the ccManager.
Instructions for performing the test appear in the online Help for the console software.
2
system modules:
2
Binary Solvent Manager Overview and Maintenance Guide
2
ccManager Operator's Overview and Maintenance Guide
2
Photodiode Array Detector Overview and Maintenance Guide
2
Sample Manager - Fixed Loop Operator's Overview and Maintenance
2
ccManager's ABPR is functioning properly. Run the
November 16, 2016, 715004521 Rev. C
Page 77
2
system modules
2
documentation CD for details on
undergoes a phase change.
2
Advertisement
Table of Contents
