Multitech CommPlete CC2400 System Installation And Quick Start Manual page 75

33. Type 1 and ENTER to change the IP Address. Type the new address and
press ENTER.
34. Type 2 and ENTER to change the current Date. Enter the date in the
format: <month>/<day>/<year>, and press ENTER.
35. Type 3 and ENTER to change the current Time. Use either 12-hour or
24-hour format, and press ENTER.
36. Type 4 and ENTER to change the Default Trap IP. Enter the IP address
that the controller will send traps to without requiring the IP to be
logged in to the supervisor. Press ENTER. If this value is set to 0.0.0.0
(default), then traps are only sent to supervisors that log in to the
controller. Type the IP address of the supervisor PC that you want to
send error and status information to, for example 192.168.4.150.
37. Type 5 and ENTER to change the Default Gateway IP address for your
network. Type the address and press ENTER.
38. Type 6 and ENTER to change the Subnet Mask for your network. Type
the address and press ENTER.
39. Type 7 and ENTER to change the Read Community option for your
network. The default setting is public. Type the new setting and press
ENTER.
The Read/Write Community options area security feature of SNMP,
which allows control over access of SNMP data by external users.
40. Type 8 and ENTER to change the Write Community option for your
network. The default setting is public. Type the new value and press
ENTER.
41. When you have made all of the necessary changes, type d and ENTER to
complete the setup.
42. A configuration summary appears:
IP Address (-(previous), q(uit), <0.0.0.0):192.168.4.150
IP Address:192.168.4.150
Date: 10/4/2000
Time:8:11am
Default Trap IP:0.0.0.0
Default Gateway:0.0.0.0
Subnet Mask:0.0.0.0
Read Community: ********
Write Communtiy: ********
Config CONTROLLER? (<y>, n): y
43. Type y and press ENTER to save your changes. Type n to cancel your
changes. If you answer y, it will not affect any current connections. The
following screen appears:
IP Address 192.168.4.182 stored
Trap IP Address 192.168.4.150 stored
Gateway IP Address 192.168.4.1 stored
Subnet Mask 255.255.255.0 stored
Read Community public stored
Write Community public stored
Device Specific Setup
1. Controller Setup
2. RAS Setup (Required)
3. T1 Setup (Required)
2 Configuration Quick Start
75