Multitech CommPlete CC2400 System Installation And Quick Start Manual page 43

65. To change the Address Method, type 7 and press ENTER. The Address
Method option appears:
Address Method
1. via DHCP server
2. Address pool
3. Per port config
4. RADIUS
Enter Selection
Type the number of the address allocation method and press ENTER.
Via DHCP Server
Type 1 to select via DHCP server. The via DHCP server option appears:
1. IP Address
2. Subnet Mask
3. Default Gateway
4. Primary DNS Server
5. Backup DNS Server
6. Frame Type
7. Address Method
8. RAS Express Password
9. Protocol
10.Primary Server
11.Secondary Server
12.Shared Secret Password
Enter Selection (-(previous), q(uit), d(one), <1>):
To change a value, type the option number. When the option appears,
enter the correct value and press ENTER. The Getting RAS Info menu
reappears. Select another menu option, or, if no other changes are
needed, type d and ENTER. Proceed to RASCard Setup step # 73.
Address Pool
From the Address Method menu, type 2 to select Address pool. The
Address Pool option appears:
1. IP Address
2. Subnet Mask
3. Default Gateway
4. Primary DNS Server
5. Backup DNS Server
6. Frame Type
7. Address Method
8. Address Pool Start
9. Address Pool End
10.Start 1st Exclusion
11.End 1st Exclusion
n d
12.Start 2 Exclusion
nd
13.End 2 Exclusion
14.RAS Express Password
15. Protocol
16.Primary Server
17.Secondary Server
18.Shared Secret Password
Enter Selection (-(previous), q(uit), d(one), <1>):
2 Configuration Quick Start
(-(previous), <3>: 2
:192.168.4.150
:255.255.255.0
:192.168.4.150
:0.0.0.0
:0.0.0.0
:Type_II
:via DHCP server
:********
:Local
:0.0.0.0
:0.0.0.0
:********
:192.168.4.150
:255.255.255.0
:192.168.4.150
:0.0.0.0
:0.0.0.0
:Type_II
:Address Pool
:0.0.0.0
:0.0.0.0
:0.0.0.0
:0.0.0.0
:0.0.0.0
:0.0.0.0
:********
:Local
:0.0.0.0
:0.0.0.0
:********
7
7
43