Table of Contents
Advertisement
System Installation and Quick Start Guide
11. Connect one end of the provided RJ48 cable to the PRI interface jack on
12. Turn on the RASCard. The indicator in the power switch and front panel
Installation of the CommPlete Communications Server hardware is complete. Your
next step is to configure the controller, RASCard, and EPRI interface so they can
communicate with the outside world. Please turn to Chapter 2.
28
the MTPRI-HD23B card, and the other end to a PRI line wall jack.
Note: Do not connect the PRI line until you are ready to perform the
configuration procedures.
should light.
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the CommPlete CC2400 and is the answer not in the manual?
Questions and answers