Multitech CommPlete CC2400 System Installation And Quick Start Manual page 35

1. Disabled
2. Enabled
Enter Selection
15. In the Wan Port IPCP menu, select Enabled if you want all WAN ports
to use TCP/IP or PPP by default. Select Disabled if TCP/IP or PPP is not
to be used. When you press E
reappears:
System Defaults Setup
1. Network Defaults
2. Ras Defaults
3. Ras Security Defaults (Required)
4. T1 Defaults (Required)
5. E1 Defaults (Required)
6. PRI Defaults (Required)
Enter Selection
16. Type 3 and press E
NTER
shows the current RAS security defaults appears with the RAS Express
Password option:
RAS Express Password:********
Primary Server :0.0.0.0
Secondary Server :0.0.0.0
Shared Secret Password:********
RAS Express Password (-(previous), q(uit), <********>):
17. The default RAS Express Password is blank (i.e., no password). To
prevent unauthorized changes to your system, you should type a new
RAS Express password. When you press E
you are asked to type the string again to confirm that you entered it
correctly. When you press E
Protocol
1. Local
2. RADIUS
3. TACACS+
Enter Selection
18. Use the Protocol menu to specify the default security protocol for your
system. Select Local if you do not have a security server on your
network. Select RADIUS if you have a RADIUS server on your network.
Select TACACS+ if you have a TACACS+ server on your network.
When you press E
NTER
Primary Server (-(previous), q(uit), <0.0.0.0>):
19. Type the IP addresses of your primary server and press ENTER. The
Secondary Security server menu appears:
Secondary Server (-(previous), q(uit), <0.0.0.0>):
20. If you do not have a secondary security server, press E
default address of 0.0.0.0. If you are using local security (i.e., RASExpress
2 Configuration Quick Start
(-(previous), q(uit), <2>):
, the System Defaults Setup menu
NTER
(-(previous), q(uit), <3>):
to set up RAS Security Defaults. A screen that
Protocol:RADIUS
NTER
again, the following menu appears:
NTER
(-(previous), q(uit), <2>):
, the Primary Server menu appears:
3
at the end of the string,
to accept the
NTER
35